Free Standard Shipping On All UK Orders!

Changing Signets


Changing Signets - Step 1

STEP 1

Hold both the signet and ring setting vertically, with the signet facing outwards.

Signet Changing - Step 2

STEP 2

Insert one signet arm in to the side of the ring setting without the horizontal groove. Tilt the signet and insert the second arm into the horizontal groove on the opposite side.

You may find gently prising the shoulders away from each other helps during this step.

Signet Changing - Step 3

STEP 3

Slide the signet arm up the vertical groove while rotating the signet to a flat position.

Signet Changing - Step 4

STEP 4

The signet should now click into place and be locked and secured in the setting.

Signet Changing - Step 1

STEP 1

Hold both ring shoulders, with the signet in the flat position.

Gently prise the shoulder with the T-groove away from the signet to release the signet spring army’s  from it’s hole.

Signet Changing - Step 2

STEP 2

Slide the signet spring arm down the T- groove while rotating the signet to a vertical position.

Signet Changing - Step 3

STEP 3

Push the signet spring arm across the horizontal groove, and free of the ring setting.

Changing Signets - Step 4

STEP 4

The signet will then come loose from the setting and you can insert another design using the 'Insert Signet' steps.

If you have any difficulty with removing or changing signets, please get in touch with hello@blushbashful.com.